Aquaness Insightsby Aquaness Chemicals

Corrosion Inhibitors in Oil and Gas Production

Produced fluids are rarely benign. Dissolved CO2 (sweet corrosion) and H2S (sour corrosion), combined with water and chlorides, attack the carbon steel of tubing and pipelines. Left unmanaged, corrosion causes leaks, failures and lost production. Corrosion inhibitors are the chemistry that keeps this in check.

The corrosion mechanisms

CO2 dissolves in water to form carbonic acid, which attacks steel and can cause localised pitting and mesa attack. H2S causes its own forms of attack, including risks of sulphide stress cracking in susceptible steels. Temperature, pressure, water chemistry and flow all influence severity.

How inhibitors protect steel

Most production corrosion inhibitors are film-forming: they contain molecules that adsorb onto the steel surface and build a thin protective layer that separates the metal from the corrosive fluid. A continuous low dose maintains the film as production flows.

Batch versus continuous

Inhibitor can be applied as a periodic batch treatment that lays down a film, or by continuous injection that maintains a steady protective concentration. Continuous treatment generally gives more consistent protection for critical systems; batch suits some wells and flowlines.

Compatibility and monitoring

Corrosion inhibitors must be compatible with scale inhibitors, demulsifiers and other chemicals in the system, and must not cause emulsions or foaming. Programmes are verified by corrosion monitoring — coupons, probes and inspection — and residual analysis, so the dose is proven to deliver the target corrosion rate.

Frequently asked questions

What makes produced fluids corrosive?
Dissolved CO2 forms carbonic acid (sweet corrosion) and H2S causes sour corrosion; combined with water and chlorides they attack carbon steel tubing and pipelines, with severity set by temperature, pressure and flow.
How do corrosion inhibitors protect steel?
Most are film-forming: their molecules adsorb onto the steel and build a thin protective layer that separates the metal from the corrosive fluid, maintained by a continuous low dose.
How is corrosion control verified?
By monitoring with coupons, probes and inspection, plus residual analysis, to confirm the inhibitor dose is delivering the target corrosion rate for the system.

Need help with production?

Aquaness Chemicals formulates, tests and supplies production chemistry across the UAE, GCC and beyond.

Explore production chemicals
AT
Aquaness Technical Team
Production Chemistry · Aquaness Chemicals

The production chemistry group at Aquaness Chemicals builds scale, corrosion and flow-assurance programmes for producing assets across the region.

Related reading

Production

Paraffin and Asphaltene Control in Production

Wax and asphaltenes deposit in tubing and flowlines and choke production. They are different problems needing different chemistry. Here is how each is controlled.

Aquaness Technical Team·27 Oct 2026